Snowboard shelf

 
Sporty flair for your kitchen
Cool snowboard shelf

Glasses, salt shakers and the like can now sit stylishly on this trendy kitchen snowboard shelf.

Submit your own rating
Submit your own rating
Submit your own rating
Submit your own rating
Submit your own rating
0 Ratings
Thank you very much for your rating This function can be used only with cookies activated.
0 Ratings
  • Downloads for the project
  • Introduction

    Difficulty level

    Costs

    Time required

    Is winter now over and your snowboard has done its job? That’s still no reason to throw it away! Give your old board a new lease on life as a trendy kitchen shelf.

    You don’t need much more than a rope, carabiner hook and a little DIY skill to make your snowboard a sporty eye-catcher for the kitchen.

    • Easy
      Easy tools
      When you want simplicity.
    • Universal
      Universal tools
      Versatility for more.
    • Advanced
      Advanced tools
      When you seek the best.

    Required power tools:

    Other accessories:

    • 10 mm metal drill bit
    • Pencil

    Required materials:

    • Old snowboard
    • Plaited rope, red/white
    • Carabiner hook
    • Eyeplates
    • Spring eyelets
    • Metal ring

    Show detailed material list

    Item

    pcs

    Designation

    Length

    Width

    Thickness

    Material

    0

    1

    Old snowboard

    1

    Plaited rope, red/white, by the metre

    3.5 m

    9 mm

    2

    2

    Carabiner hook

    80 mm

    8 mm

    3

    2

    Eyeplates

    4

    2

    Spring eyelets

    10 mm

    5

    1

    Metal ring

    30 mm

    1

    Sanding down the snowboard

    Step 1 - Schleifen
    Step 1 - Schleifen

    First sand down the edges of the cleaned snowboard. This is really easy to do with a multi-sander. On the back of the board, mark four holes which will be used to hang it up. Also transfer these hole spacings onto the wall.

    2

    Fastening the rope

    Step 2 - Seil befestigen
    Step 2 - Seil befestigen

    Use a combi drill to drill the holes in the board. Note: Use a metal drill bit on a snowboard that has a metal core. Then decide how high you want the shelf to be and fasten the rope to the snowboard with a knot at each hole.

    3

    Fitting the carabiner hook

    Step 3 - Karabiner anbringen
    Step 3 - Karabiner anbringen

    Use a masonry drill bit in the combi drill to drill the holes in the wall. Then drill the holes and insert wall plugs. Fit the spring eyelet and the eyeplate, and connect the carabiner hooks.

    4

    Hanging the shelf

    Step 4 - Regal aufhängen
    Step 4 - Regal aufhängen

    Finally, feed the ropes through the carabiner and now your speedy shelf is finished!


    Legal note

    Bosch does not accept any responsibility for the instructions stored here. Bosch would also like to point out that you follow these instructions at your own risk. For your own safety, please take all the necessary precautions.


     

    Application advice

    Have any questions about our products and applications?

    :+27 11 651 9870

    Monday - Friday: 8:00 - 16:30


    To e-mail contact form

    Find a retailer

     
     
     
    ZA
    Add to wish list
    Added to wish list
    Buy now
    Reset filter
    Show filter
    Hide filter
    Thank you very much for your rating
    Thank you very much for your rating
    Show other projects
    Hide other projects
    Hide article variants
    Show article variants
    Close application tip
    Open application tip
    Read experience report
    Close experience report
    Hide detailed material list
    Show detailed material list
    Comparison list
    Products
    Product
    Show more recommendations
    Hide further recommendations