Ski coatrack

 
Sporty retro flair in the hall
Ski coatrack

A different use for skis: Give your old skis a new life as sporty coatrack rails.

Submit your own rating
Submit your own rating
Submit your own rating
Submit your own rating
Submit your own rating
0 Ratings
Thank you very much for your rating This function can be used only with cookies activated.
0 Ratings
  • Downloads for the project
  • Introduction

    Difficulty level

    Costs

    Time required

    Do you still have old skis gathering dust in a corner of your attic? Give them a new lease on life with the stylish retro ski coatrack. In only a few steps and with the right tools, you can have your skis looking just as stylish as they did on the piste.

    • Easy
      Easy tools
      When you want simplicity.
    • Universal
      Universal tools
      Versatility for more.
    • Advanced
      Advanced tools
      When you seek the best.

    Required power tools:

    Other accessories:

    • 3 mm wood drill bit
    • 8 mm masonry drill bit
    • Pencil
    • Possibly spirit level for checking

    Required materials:

    • Old skis
    • Wall hooks
    • Wood screws for hooks
    • 4 wall plugs and 4 matching screws
    • Cover caps for screws, black

    Show detailed material list

    Item

    pcs

    Designation

    Length

    Width

    Thickness

    Material

    0

    2

    Old skis

    1

    7

    Wall hooks

    2

    Wood screws for hooks

    12 mm

    3 mm

    3

    4

    Wall plugs and matching screws

    8 mm

    4

    Cover caps for screws, black

    1

    Fitting the hooks

    Step 1 - Haken anbringen
    Step 1 - Haken anbringen

    First use a pencil to mark the position of the hooks on the cleaned skis. Then it’s time to use the combi drill, which drills clean holes in the skis. Note: Use a metal drill bit on skis that have a metal core. Then screw on the wall hooks.

    2

    Fitting to the wall

    Step 2 - Wandbefestigung
    Step 2 - Wandbefestigung

    Now drill two holes on the back of each ski and mark the same hole spacing on the wall. Note: To drill the holes in the wall, you should now switch the bit in the combi drill to a masonry drill bit. Drill the holes and insert the wall plugs.

    3

    Hiding the screws

    Step 3 - Schrauben verstecken
    Step 3 - Schrauben verstecken

    Last but not least, put small cover caps on the skis to hide the screws. The sporty eye-catcher in your hall is then finished!


    Legal note

    Bosch does not accept any responsibility for the instructions stored here. Bosch would also like to point out that you follow these instructions at your own risk. For your own safety, please take all the necessary precautions.


     

    Application advice

    Have any questions about our products and applications?

    :+27 11 651 9870

    Monday - Friday: 8:00 - 16:30


    To e-mail contact form

    Find a retailer

     
     
     
    ZA
    Add to wish list
    Added to wish list
    Buy now
    Reset filter
    Show filter
    Hide filter
    Thank you very much for your rating
    Thank you very much for your rating
    Show other projects
    Hide other projects
    Hide article variants
    Show article variants
    Close application tip
    Open application tip
    Read experience report
    Close experience report
    Hide detailed material list
    Show detailed material list
    Comparison list
    Products
    Product
    Show more recommendations
    Hide further recommendations