- Current news
Entries 1 - 5 of 5
The bearing points of tools with mechanically moving parts have to absorb and compensate forces, motions and friction. There is a wide range of bearings depending on the type of strain, whereby, for example, a slide bearing has lower friction and is therefore designed for higher speeds, whereas a rolling bearing can withstand greater force.
Elliptical wooden dowel made of compressed wood with various dimensions. The biscuit dowel is fitted in a slot that is routed in the wooden parts and produces an invisible wooden joint.
Hand-held power tool for routing grooves in wood. The grooves accept biscuit dowels for corner, frame, longitudinal or cross joints. Biscuit jointers work at very high speeds to guarantee a cleanly routed finish.
Sharp edge and frayed material, usually on a metallic workpiece, created during production or processing. Plastic parts can also have a burr. Metallic burrs are usually removed by brushing, filing or grinding, whereas plastic burrs are removed with special blades.