- Current news
How to make dull surfaces shine again
Turn your random orbit sander into a polishing tool – and make dull surfaces shine again!
The right way to polish with the random orbit sander. Replacing the sanding sheet on your random orbit sander with a polishing felt or sponge gives you an efficient polishing tool – e.g. for paint, brass and perspex.
A polishing paste is usually used together with a polishing felt disc. The paste builds up in the felt disc during the polishing process.
You should use a new felt disc and a finer polish for every subsequent polishing run. Important: The workpiece surface must be carefully cleaned of previous polish between polishing runs because otherwise it builds up in the new felt disc.
Only use suitable polish and a lambswool bonnet when polishing car paint. Apply the suitable polishing wax evenly to the paint surface (by hand or with a machine). Then polish the paintwork of your car at low speed by applying little pressure.
By the way:
You can rent polishing machines from the DIY store for large surfaces such as floors.
Bosch does not accept any responsibility for the instructions stored here. Bosch would also like to point out that you follow these instructions at your own risk. For your own safety, please take all the necessary precautions.