Straight cut with the jigsaw

Submit your own rating
Submit your own rating
Submit your own rating
Submit your own rating
Submit your own rating
0 Ratings
Thank you very much for your rating This function can be used only with cookies activated.
0 Ratings

Good guidance ensures a beautiful cut

Exactly straight cuts are often required when sawing – for example when laying laminate or parquet. We’ll show you how to do this with the jigsaw.

Straight cut with the jigsaw


You can also achieve straight cuts with a jigsaw if you observe the following points:


Choose an intact saw blade that is suitable for the material and the application. Saw blades with a wide tooth spine are used for straight cuts because they have better linear guidance.


Use a saw station for jigsaws. Simply mount the workpiece, put the jigsaw in the guide rail and safely pull it through the workpiece. This will enable you to effortlessly saw both straight cross cuts and angled cuts between –45° and +45°.


Pay attention to your safety. Wear protective glasses and remove the saw blade from the machine when you have finished working with it.

Legal note

Bosch does not accept any responsibility for the instructions stored here. Bosch would also like to point out that you follow these instructions at your own risk. For your own safety, please take all the necessary precautions.


Application advice

Have any questions about our products and applications?

:+27 11 651 9870

Monday - Friday: 8:00 - 16:30

To e-mail contact form

Find a retailer

Add to wish list
Added to wish list
Buy now
Reset filter
Show filter
Hide filter
Thank you very much for your rating
Thank you very much for your rating
Show other projects
Hide other projects
Hide article variants
Show article variants
Close application tip
Open application tip
Read experience report
Close experience report
Hide detailed material list
Show detailed material list
Comparison list
Show more recommendations
Hide further recommendations