Sanding corners, edges and angles

 
Submit your own rating
Submit your own rating
Submit your own rating
Submit your own rating
Submit your own rating
0 Ratings
Thank you very much for your rating This function can be used only with cookies activated.
0 Ratings

Small detail, big performance

Furniture often looks more appealing when the corners and edges are chamfered, i.e. sanded at a 45-degree angle. This task is perfect for the handy and versatile multi-sander or the specialists for hard-to-reach areas: delta sanders and compact belt sanders.

 
Sanding corners, edges and angles

Procedure:

How to sand corners, edges and angles effortlessly:

1

To chamfer wood edges, choose sanding paper with a grit of 120 to 180.

2

Switch on the sander, apply it at a 45-degree angle and slowly pull it over the edge of the workpiece.

3

Delta sanders and compact belt sanders are ideal for sanding in hard-to reach angles. Using the right attachment, you can also use the multi-sander for this task.



Legal note

Bosch does not accept any responsibility for the instructions stored here. Bosch would also like to point out that you follow these instructions at your own risk. For your own safety, please take all the necessary precautions.


 

Application advice

Have any questions about our products and applications?

:+27 11 651 9870

Monday - Friday: 8:00 - 16:30


To e-mail contact form

Find a retailer

 
 
 
ZA
Add to wish list
Added to wish list
Buy now
Reset filter
Show filter
Hide filter
Thank you very much for your rating
Thank you very much for your rating
Show other projects
Hide other projects
Hide article variants
Show article variants
Close application tip
Open application tip
Read experience report
Close experience report
Hide detailed material list
Show detailed material list
Comparison list
Products
Product
Show more recommendations
Hide further recommendations