Mitre cut with the mitre saw

Submit your own rating
Submit your own rating
Submit your own rating
Submit your own rating
Submit your own rating
0 Ratings
Thank you very much for your rating This function can be used only with cookies activated.
0 Ratings

The secret to mitres

Clean mitre cuts are always required when you need to make nice, sturdy corner joints. Do you, for example, want to build a doll’s house with a gable roof? Or make a room divider out of square timbers? A mitre saw will make it easy for you. This is how to make a perfect mitre cut every time.


How to cleanly and safely saw your workpiece at a mitre angle:


Insert the workpiece and fix it with the clamp.


Set the mitre angle on the saw. The cutting line is projected onto the workpiece by a laser.


Slowly apply the saw to the workpiece and perform the cut.


Pay attention to your safety. Work without rushing and wear protective glasses and ear protectors.

Projects with this application

Legal note

Bosch does not accept any responsibility for the instructions stored here. Bosch would also like to point out that you follow these instructions at your own risk. For your own safety, please take all the necessary precautions.


Application advice

Have any questions about our products and applications?

:+27 11 651 9870

Monday - Friday: 8:00 - 16:30

To e-mail contact form

Find a retailer

Add to wish list
Added to wish list
Buy now
Reset filter
Show filter
Hide filter
Thank you very much for your rating
Thank you very much for your rating
Show other projects
Hide other projects
Hide article variants
Show article variants
Close application tip
Open application tip
Read experience report
Close experience report
Hide detailed material list
Show detailed material list
Comparison list
Show more recommendations
Hide further recommendations