Entries 1 - 3 of 3

  • Operating speed (operating stroke rate)
    • With some power tools, such as impact drills, rotary hammers, angle grinders, planers and routers, the operating speed states the no-load speed (idling speed). With jigsaws, the no-load speed is the no-load stroke rate.

  • Orbital sander
    • Orbital sander
      Orbital sander Orbital sander

      Due to the orbital motion of its sanding surface, an orbital sander ensures a fine finish, especially on large surfaces. The material removal rate of an orbital sander is lower than that of a belt sander.

  • Overload
    • Overload often occurs in power tools when excessive feed pressure is applied to the tool; a frequent cause is also the use of unsuitable, blunt or incorrectly ground accessories. As soon as overload occurs, the motor protection (if present) switches the machine off automatically.

Entries 1 - 3 of 3


Service Hotline

For questions on our After Sales Service:


:00966 (0) 12 692 0770 - Ext 433


:00966 (0) 11 409 3976 – Ext-30/34/39


:00966 (0) 13 833 9565

Find a retailer

Add to wish list
Added to wish list
Buy now
Reset filter
Show filter
Hide filter
Thank you very much for your rating
Thank you very much for your rating
Show other projects
Hide other projects
Hide article variants
Show article variants
Close application tip
Open application tip
Read experience report
Close experience report
Hide detailed material list
Show detailed material list
Comparison list
Show more recommendations
Hide further recommendations