The basics of wood joints

 
Submit your own rating
Submit your own rating
Submit your own rating
Submit your own rating
Submit your own rating
0 Ratings
Thank you very much for your rating This function can be used only with cookies activated.
0 Ratings

Which connection is the right one?

Even solidly built utility furniture seldom lasts for a lifetime because it is constantly being used. Any repair work on wooden furniture begins with the stabilising of joints, frames and stands.

The basics of wood joints
The basics of wood joints
The basics of wood joints

Procedure:

There are three different types of wood joints for connecting workpiece parts together: material closure (e.g. glued), force closure (e.g. bolted, nailed, wedged) and form closure (e.g. slotted, dowelled, pinned). Wood works – even in board form. This must be taken into consideration for all joints, in particular those made of solid wood. Wooden parts can be joined together in a detachable or undetachable manner. Detachable joints use appropriate fittings to hold the individual elements together. Undetachable joints are always made with an adhesive and can – as long as they do not become loose of their own accord over time – only be undone by being destroyed. The most common joints are form closure joints. Here is a selection:

1

Blunt, dowelled joints are very commonly used in furniture manufacture. These joints are made by drilling in dowels and are extremely durable. However, they are difficult to produce – as is the case with the extremely sturdy corner joints with biscuit dowels. This is why corners are also often joined together using tongue and groove joints.

2

The overlap is the simplest corner joint used in frame making. It is made by cutting out half of the wood thickness from each part of the workpieces that are to be joined; the workpieces are then glued together. However, this joint is not particularly resilient. For this reason, they should be additionally secured using screws or pins.

3

The mortise and tenon joint is particularly suitable for producing window and furniture frames. The upright frame parts are normally given slots, the horizontal parts are given tenons. Double tenons are common in thick wooden frames.

4

Dovetailing is multiple interlocking of straight or wedge-shaped tenons, also called dovetails. This type of joint is used for solid wood because the joined parts can expand or shrink unhindered without losing their shape. The dovetail joint is also a form of visual ornamentation.


Legal note

Bosch does not accept any responsibility for the instructions stored here. Bosch would also like to point out that you follow these instructions at your own risk. For your own safety, please take all the necessary precautions.


 

Service Hotline

For questions on our After Sales Service:

Jeddah:

:00966 (0) 12 692 0770 - Ext 433

Riyadh:

:00966 (0) 11 409 3976 – Ext-30/34/39

Dammam:

:00966 (0) 13 833 9565

Find a retailer

 
 
 
SA
Add to wish list
Added to wish list
Buy now
Reset filter
Show filter
Hide filter
Thank you very much for your rating
Thank you very much for your rating
Show other projects
Hide other projects
Hide article variants
Show article variants
Close application tip
Open application tip
Read experience report
Close experience report
Hide detailed material list
Show detailed material list
Comparison list
Products
Product
Show more recommendations
Hide further recommendations