Splendid new look after beauty treatment
Have you got an old door with cracked varnish? Give it a makeover!
To enable an old door with cracked paint to spread a stylish atmosphere again, it has to be renovated. You can easily do this yourself on solid wood doors.
Unhinge the door and lay it horizontally on two trestles. If you want to strip the paint yourself – only outdoors of course –, you must wear rubber gloves and a face mask. Apply the paint remover with a wide paintbrush and leave it to soak in for half an hour (you can also take the door to a commercial paint stripping service, which will also take care of the disposal of varnish and paint remover).
Now you can push off the softened paint using a scraper – repeating the process until the original wooden structure is uncovered. Tip: On doors with decorated or profiled surfaces, it is better to use steel wool (but never on oak wood!) or a clean wire brush.
Sand down the door with an orbital sander.
Then thoroughly remove dust and apply a wood preservative.
Once it has dried, coat the door with wood varnish or paint (always in the direction of the grain). Leave it to dry again and then apply a second coat.
Bosch does not accept any responsibility for the instructions stored here. Bosch would also like to point out that you follow these instructions at your own risk. For your own safety, please take all the necessary precautions.