Create this decorative wooden photo board to display your favourite memories

 
Step-by-step project
How to create a decorative wooden photo board

Spruce up your bedroom wall with this decorative feature containing your favourite memories.

Submit your own rating
Submit your own rating
Submit your own rating
Submit your own rating
Submit your own rating
0 Ratings
Thank you very much for your rating This function can be used only with cookies activated.
0 Ratings
  • Downloads for the project
  • Introduction

    Difficulty level

    Costs

    Time required

    Do your favorite images regularly fall into oblivion on your smartphone? With this photo board you will be able to remember these beautiful moements every day, as well as adding a touch of personality to your wall.

    • Easy
      Easy tools
      When you want simplicity.
    • Universal
      Universal tools
      Versatility for more.
    • Advanced
      Advanced tools
      When you seek the best.

    Required power tools:

    Other accessories:

    • Wood drill bit: 1-2 mm
    • Pencil
    • Floor protector or cover sheets
    • Face mask
    • Protective goggles
    • Protective gloves
    • Screw clamps

    Required materials:

    • Board
    • Thin wire/craft wire/garden wire
    • Mini clothes pegs
    • Screw eyes: 2 cm long with 3 mm thread (external diameter of eyes: 10 mm)
    • Beads with hole with an internal diameter of at least 3 mm
    • Paint

    Show detailed material list

    Item

    pcs

    Designation

    Length

    Width

    Thickness

    Material

    0

    1

    Board

    120 cm

    12 cm

    2 cm

    1

    1

    Thin wire/craft wire/garden wire

    62 cm

    2

    8

    Mini clothes pegs

    3

    3-4

    Screw eyes: 2 cm long with 3 mm thread (external diameter of eyes: 10 mm)

    4

    2

    Beads with hole with an internal diameter of at least 3 mm

    5

    Paint

    1

    Measure and cut the wood to length

    The photo board is designed to fit your individual style. Measure out the board to 120 cm long and 12 cm wide (however this will depend on how much space you have in your home). Then, simply saw the board to size with a jigsaw. Before you start make sure to clamp the board down with screw clamps onto a work surface to keep it steady.

    1 - Measure and cut the wood to length
    Measure and cut the wood to length

    2

    Sand the edges

    Sometimes frayed corners may occur during sawing. In order for your photo board to have beautiful edges, simply sand then down. To do this, use a multi-sander and move evenly without too much pressure on the edges of the board. You can simply wipe off the wood dust with a small hand brush or use a vacuum cleaner. Don’t forget to protect your eyes with protective goggles!

    2 - Sand the edges
    Sand the edges

    3

    Add some colour to your board

    What you need: paint spray system, pencil, paint

    Now to decorate your photo board with some paint. Whether yellow, turquoise, black or white ... just choose your favorite colour and spray! Before this, make sure to cover the floor with a cover sheet and wear a face mask to stop inhalation of the paint. When using the paint spray system adjust it to the "beam" setting and spray the board on both sides.

    DIY tip:

    Hold the fine spray system about a foot away from the wood.

    3 - Add some colour to your board
    Add some colour to your board

    4

    Attaching the wire

    What you need: cordless drill/driver with matching bit, wood drill bit 1-2mm, pincers, wire

    Once the paint is dry it is time to attach the wire to the board. Firstly, mark where the pilot holes for the eyes are to be drilled – these should be about halfway up, and at least 3 cm from the edge. Then using a cordless drill/driver with 1-2 mm wood drill bit, drill pilot holes of no more than 1cm deep for the eyes and then screw in the eyes. Next use pincers to trim the wire to size, thread it through the first eye and wind the wire around itself to fasten it.

    4 - Attaching the wire
    Attaching the wire

    5

    Adding the finishing touches

    What you need: beads, pegs, photos

    Slide the beads onto the wire. Then, thread the wire through the other eyes, pull it taut and wrap the end of the wire several times around the taut section of wire. Cover the parts of the wire that are wound around itself by sliding the beads onto it.

    How many pictures you want to hang up depends entirely on your taste and how much space you have! Fasten your favorite images with pegs on the wire and your own individual wall design is ready!

    5 - Adding the finishing touches
    Adding the finishing touches



    Legal note

    Bosch does not accept any responsibility for the instructions stored here. Bosch would also like to point out that you follow these instructions at your own risk. For your own safety, please take all the necessary precautions.


     

    Service Hotline

    For questions on our After Sales Service:

    :+64 800 543 353

    Monday - Friday: 8:30 - 17:00


    To e-mail contact form

    Find a retailer

     
     
     
    NZ
    Add to wish list
    Added to wish list
    Buy now
    Reset filter
    Show filter
    Hide filter
    Thank you very much for your rating
    Thank you very much for your rating
    Show other projects
    Hide other projects
    Hide article variants
    Show article variants
    Close application tip
    Open application tip
    Read experience report
    Close experience report
    Hide detailed material list
    Show detailed material list
    Comparison list
    Products
    Product
    Show more recommendations
    Hide further recommendations