Good guidance ensures a beautiful cut
Exactly straight cuts are often required when sawing – for example when laying laminate or parquet. We’ll show you how to do this with the jigsaw.
You can also achieve straight cuts with a jigsaw if you observe the following points:
Choose an intact saw blade that is suitable for the material and the application. Saw blades with a wide tooth spine are used for straight cuts because they have better linear guidance.
Use a saw station for jigsaws. Simply mount the workpiece, put the jigsaw in the guide rail and safely pull it through the workpiece. This will enable you to effortlessly saw both straight cross cuts and angled cuts between –45° and +45°.
Pay attention to your safety. Wear protective glasses and remove the saw blade from the machine when you have finished working with it.
Bosch does not accept any responsibility for the instructions stored here. Bosch would also like to point out that you follow these instructions at your own risk. For your own safety, please take all the necessary precautions.