BBQ Buddy

 
Football Party - made by Bosch
Create pallet furniture for your balcony or garden

Our BBQ Buddy is a handy addition to your summer garden!

Submit your own rating
Submit your own rating
Submit your own rating
Submit your own rating
Submit your own rating
0 Ratings
Thank you very much for your rating This function can be used only with cookies activated.
0 Ratings
  • Downloads for the project
  • Introduction

    Difficulty level

    Costs

    Time required

    Summer, sun and the European Championships! We think that calls for a BBQ party with friends, and this handy BBQ Buddy is sure to impress your guests! Here’s how to build it:

    • Easy
      Easy tools
      When you want simplicity.
    • Universal
      Universal tools
      Versatility for more.
    • Advanced
      Advanced tools
      When you seek the best.

    Required power tools:

    Other accessories:

    • Bitset
    • Pencil
    • 80 grit sandpaper
    • Protective equipment
    • Woodstain

    Required materials:

    • Wooden pallets
    • Castors
    • Screws

    Show detailed material list

    Item

    pcs

    Designation

    Length

    Width

    Thickness

    Material

    0

    4

    Wooden pallets

    1

    4

    Castors

    50mm

    2

    20

    Screws

    20mm

    3,5mm

    3

    100

    Screws

    40mm

    4,0mm

    4

    30

    Screws

    70mm

    4,5mm

    1

    Preparation of side sections

    1 - Preparation of side sections
    Preparation of side sections

    Cut the side panels to the required size, and sand the area. Following this, screw the parts together.

    2

    Preparation of storage compartment

    2 - Preparation of storage compartment
    Preparation of storage compartment

    Separately, prepare the storage compartment/shelf for the inside of your BBQ Buddy.

    3

    Attach the side sections

    3 - Attach the side sections
    Attach the side sections

    Connect the base to the side sections.

    4

    Attach the cover and storage compartment

    4 - Attach the cover and storage compartment
    Attach the cover and storage compartment

    Use the same technique as before, attach the cover to your BBQ Buddy. Then attach the storage compartment to the inside.

    5

    Attach the frame and BBQ utensils holder

    5 - Attach the frame and BBQ utensils holder
    Attach the frame and BBQ utensils holder

    Finally, attach the frame, utensils holder and castors to finish your BBQ Buddy.

    6

    Your BBQ Buddy is now ready to use!

    6 - Your BBQ Buddy is now ready to use!
    Your BBQ Buddy is now ready to use!

    Don´t forget to stain or paint your furniture, and get ready to enjoy the barbecue & football season!


    Product recommendations

    Angle Measurer - PAM 220 Angle Measurer

    PAM 220


    Legal note

    Bosch does not accept any responsibility for the instructions stored here. Bosch would also like to point out that you follow these instructions at your own risk. For your own safety, please take all the necessary precautions.


     

    Service Hotline

    For questions on our After Sales Service:

    :0344 736 0109*

    Monday - Friday: 08:00 - 17:00


    *Calls to 03 numbers cost the same as 01/02 prefix calls and are included in inclusive minutes and discount schemes in the same way.

    To e-mail contact form

    Find a retailer

     
     
     
    GB
    Add to wish list
    Added to wish list
    Buy now
    Reset filter
    Show filter
    Hide filter
    Thank you very much for your rating
    Thank you very much for your rating
    Show other projects
    Hide other projects
    Hide article variants
    Show article variants
    Close application tip
    Open application tip
    Read experience report
    Close experience report
    Hide detailed material list
    Show detailed material list
    Comparison list
    Products
    Product
    Show more recommendations
    Hide further recommendations