The right way to sand

 
Submit your own rating
Submit your own rating
Submit your own rating
Submit your own rating
Submit your own rating
0 Ratings
Thank you very much for your rating This function can be used only with cookies activated.
0 Ratings

Which sander is suitable for which application?

Sanding is part of the preparation required for virtually every type of surface treatment work. Find out which is the right sander for which application.

The right way to sand
The right way to sand
The right way to sand

Procedure:

Sanding is part of the preparation required for virtually every type of surface treatment work. However, you will also require different sanding tools for the various finishes:

1

The delta sander is suitable for working on corners; the random orbit sander can sand both flat and slightly curved surfaces. The orbital sander is used for material removal on smaller flat surfaces; the belt sander is used for sanding down large surfaces.

2

Orbital sanders and delta sanders have hardly any risk potential but the sanding dust must be constantly extracted. Random orbit sanders do not require any protective devices, either. As long as you hold the tool with both hands at the intended grip positions, nothing can go wrong.

3

In contrast, working with belt sanders demands a certain amount of practice. In order to prevent the machine from spontaneously accelerating forwards when it is lowered onto the workpiece, the belt sander always has to be applied very carefully. You should also hold the machine firmly without pressing too hard.

4

Sand all materials in several steps with increasingly finer grit (from grit 80 to grit 220 sanding paper). Also always move the sanding machine along the grain of the wood, never across it.


Legal note

Bosch does not accept any responsibility for the instructions stored here. Bosch would also like to point out that you follow these instructions at your own risk. For your own safety, please take all the necessary precautions.


 

Service Hotline

For questions on our After Sales Service:

:0344 736 0109*

Monday - Friday: 08:00 - 17:00


*Calls to 03 numbers cost the same as 01/02 prefix calls and are included in inclusive minutes and discount schemes in the same way.

To e-mail contact form

Find a retailer

 
 
 
GB
Add to wish list
Added to wish list
Buy now
Reset filter
Show filter
Hide filter
Thank you very much for your rating
Thank you very much for your rating
Show other projects
Hide other projects
Hide article variants
Show article variants
Close application tip
Open application tip
Read experience report
Close experience report
Hide detailed material list
Show detailed material list
Comparison list
Products
Product
Show more recommendations
Hide further recommendations