Restoring tables and chairs

 
Submit your own rating
Submit your own rating
Submit your own rating
Submit your own rating
Submit your own rating
0 Ratings
Thank you very much for your rating This function can be used only with cookies activated.
0 Ratings

Rescue tables and chairs from the rubbish tip

Rescue old tables and chairs from the rubbish tip – with your delta sander!

Procedure:

When tables and chairs look old and worn down, they do not have to be just thrown away. Restore them using your delta sander!

1

First of all, the old paint has to be removed. Use a sanding sheet with coarse grit (60) for your delta sander. Now completely sand down the piece of furniture.

2

Repair damaged areas. Replace broken parts; repair cracks and holes with filler.

3

Once the filler has hardened, sand again. Now, however, you use a fine-grit sanding sheet (grit of 180 for softwood and grit of 120 for hardwood).

4

Finally, seal the surfaces using varnish, paint or wax.


Legal note

Bosch does not accept any responsibility for the instructions stored here. Bosch would also like to point out that you follow these instructions at your own risk. For your own safety, please take all the necessary precautions.


 

Service Hotline

For questions on our After Sales Service:

:0344 736 0109*

Monday - Friday: 08:00 - 17:00


*Calls to 03 numbers cost the same as 01/02 prefix calls and are included in inclusive minutes and discount schemes in the same way.

To e-mail contact form

Find a retailer

 
 
 
GB
Add to wish list
Added to wish list
Buy now
Reset filter
Show filter
Hide filter
Thank you very much for your rating
Thank you very much for your rating
Show other projects
Hide other projects
Hide article variants
Show article variants
Close application tip
Open application tip
Read experience report
Close experience report
Hide detailed material list
Show detailed material list
Comparison list
Products
Product
Show more recommendations
Hide further recommendations