Dog bowl

 
Designed for a man’s best friend
Dog bowl with style

Gone are the days when your dog had to bend down to eat, because now you can treat him to the chair feeding bowl!

Submit your own rating
Submit your own rating
Submit your own rating
Submit your own rating
Submit your own rating
0 Ratings
Thank you very much for your rating This function can be used only with cookies activated.
0 Ratings

Introduction

Difficulty level

Costs

Time required

Who let the dogs out? Your canine companion will need no invitation to eat at this stylish feeding station. With a bit of DIY skill, you can easily integrate the feeding bowl into the chair yourself. Create a truly delicious designer piece, and give your four-legged friend a treat: Gone are the days when your dog had to bend down to eat.

  • Easy
    Easy tools
    When you want simplicity.
  • Universal
    Universal tools
    Versatility for more.
  • Advanced
    Advanced tools
    When you seek the best.

Required power tools:

Other accessories:

  • Pencil
  • Utility knife
  • Paintbrush

Required materials:

  • Chairs
  • Feeding bowls
  • Bone template
  • Adhesive foil

Show detailed material list

Item

pcs

Designation

Length

Width

Thickness

Material

0

2

Chairs (seat height corresponding to back height of dog)

1

2

Feeding bowls with protruding rim

2

Bone template you can print out yourself

see download for the project

3

Adhesive foil

1

Sawing the holes

Step 1
Step 1

First measure the diameter of the feeding bowl underneath its rim, and then draw a circle of the same size in the centre of the seat of the chair. Then cut out the circle along the line. You will be able to saw a clean hole with the PST 10,8 LI cordless multisaw. Repeat the steps on the other chair.

2

Cutting out the decoration

Step 2
Step 2

To ensure that a perfect dog’s bone decorates the back of the chair later on, print out the template and cut it out. Transfer the outline of the bone onto the adhesive film using a pencil and cut it out along the outline.

3

Attaching the decoration

Step 3
Step 3

Now attach the adhesive film to the desired position on the back of the chair.

4

Customising the feeding bowl

Step 4
Step 4

Then colour in the affixed bone shape with the paintbrush and the blackboard paint. Important: Leave the paint to dry well so that there are no frayed edges afterwards! Then peel off the film and write whatever you want on the black surface, for example “Eat” and “Drink”. Finally, place the dog bowl in the sawn hole, fill it with your dog’s favourite food – and feeding time will become even more enjoyable.


Product recommendations

Cordless multisaw - PST 10,8 LI Cordless multisaw

PST 10,8 LI


Legal note

Bosch does not accept any responsibility for the instructions stored here. Bosch would also like to point out that you follow these instructions at your own risk. For your own safety, please take all the necessary precautions.


 

Service Hotline

For questions on our After Sales Service:

:+61 1300 307 044

Monday - Friday: 8:30 - 17:00


To e-mail contact form

Find a retailer

 
 
 
AU
Add to wish list
Added to wish list
Buy now
Reset filter
Show filter
Hide filter
Thank you very much for your rating
Thank you very much for your rating
Show other projects
Hide other projects
Hide article variants
Show article variants
Close application tip
Open application tip
Read experience report
Close experience report
Hide detailed material list
Show detailed material list
Comparison list
Products
Product
Show more recommendations
Hide further recommendations