Entries 1 - 8 of 8

  • Fastening technology
    • Generic term for all drilling and fixing work in civil engineering, on natural and artificial stone. It is done using drilling tools for installing fixings and anchors.

  • Filter
    • Tools are equipped with a filter to protect them against wear and malfunctions caused by dust or other impurities. Filter elements can consist of treated paper materials, glass fibre or plastic fleeces, textile or metal fabric.

  • Fixing types
    • There is a wide range of fixing types, depending on which building material the fixings are to be inserted into.

      Plastic expansion plugs– The classical all-purpose fixing for concrete and solid masonry

      Spring toggles– Made of plastic or metal for cavity fixing applications

      Cavity wall plugs– For fitting in plasterboard

      Wooden dowels– Wooden pins or elliptical pieces of compressed wood (biscuit dowels) for joining wooden parts

  • Fixings
    • A fixing is a joining element used for fitting building components to masonry or wood. Each application has the correct fixing type. It is very easy to use a fixing: drill a hole, insert the fixing into the hole and knock it with a hammer to guarantee a secure fit. Then drive the screw into the appropriate fixing – done.

  • Flat chisel
    • Accessory with flat, chisel-shaped cutting edge. Depending on the application, there are flat chisels with different widths of cutting edge.

  • Flat head screw
    • Joining element mainly used in woodworking. The flat head screw has a slanted, fluent transition from the cylinder body to the screw head. This enables it to be “countersunk” in a surface especially well together with the head. It is driven into the wood until the top of the screw head is flush with the surface of the building component to form a smooth surface.

  • Forstner drill bit
    • For producing holes with large diameters, e.g. like those required for fitting hinges in furniture

  • Forward/reverse rotation
    • Forward/reverse rotation
      Forward/reverse rotation

      Switching from forward to reverse rotation, e.g. on drills and impact drills, enables you to drive and remove screws. Switching can be performed mechanically or electrically.

Entries 1 - 8 of 8


Service Hotline

For questions on our After Sales Service:

:+61 1300 307 044

Monday - Friday: 8:30 - 17:00

To e-mail contact form

Find a retailer

Add to wish list
Added to wish list
Buy now
Reset filter
Show filter
Hide filter
Thank you very much for your rating
Thank you very much for your rating
Show other projects
Hide other projects
Hide article variants
Show article variants
Close application tip
Open application tip
Read experience report
Close experience report
Hide detailed material list
Show detailed material list
Comparison list
Show more recommendations
Hide further recommendations