Snowboard table

 
Ski slope feeling for the living room
Sporty snowboard coffee table

Instead of a classic coffee table, a discarded snowboard can now offer space for magazines, drinks and crisps.

Submit your own rating
Submit your own rating
Submit your own rating
Submit your own rating
Submit your own rating
0 Ratings
Thank you very much for your rating This function can be used only with cookies activated.
0 Ratings
  • Downloads for the project
  • Introduction

    Difficulty level

    Costs

    Time required

    Where do you put the snowboard in summer? In the living room, of course! Instead of taking up space in the cellar, the board can now offer space for your bits and bobs. It is quickly and easily transformed into a stylish coffee table, balancing everything you need for a cosy evening in front of the TV.

    And when the snow returns, the snowboard can even be quickly restored to its original function with a few skilful tricks!

    • Easy
      Easy tools
      When you want simplicity.
    • Universal
      Universal tools
      Versatility for more.
    • Advanced
      Advanced tools
      When you seek the best.

    Required power tools:

    Other accessories:

    • 6 mm metal drill bit
    • Sanding paper
    • Pencil

    Required materials:

    • Old snowboard
    • Table legs (e.g. from an old stool or from the DIY store)
    • Flat-head threaded screws with slot
    • Nuts
    • Washers

    Show detailed material list

    Item

    pcs

    Designation

    Length

    Width

    Thickness

    Material

    0

    1

    Old snowboard

    1

    Table legs

    40 cm

    2

    4

    Flat-head threaded screws with slot

    5 cm

    40 mm

    3

    4

    Nuts

    4

    4

    Washers

    1

    Drilling the holes for the table legs

    1 - Drilling the holes for the table legs
    Drilling the holes for the table legs

    First sand down the edges of the cleaned snowboard and then mark the holes for the table legs on the back of the board. Then use a drill driver to drill the holes in the board. Note: Use a metal drill bit on a snowboard that has a metal core.

    2

    Fitting the table legs

    2 - Fitting the table legs
    Fitting the table legs

    Finally, fit the table legs with threaded screws, remembering to use the washers. Done! Make yourself comfortable on the couch!

    Tip: If you’re going on a snowboarding trip again next winter, you can easily convert the snowboard table back into a functional board: Simply unscrew the table legs, seal the holes and wax the board – and you’re done!


    Legal note

    Bosch does not accept any responsibility for the instructions stored here. Bosch would also like to point out that you follow these instructions at your own risk. For your own safety, please take all the necessary precautions.


     

    Service Hotline

    For questions on our After Sales Service:

    Dubai:

    :+971 (0) 4 3090920/3090930

    Abu Dhabi:

    :+971 (0) 2 4017745

    Sharjah:

    :+971 (0) 6 5932777

    Al Ain:

    :+971 (0) 3 7157419

    Find a retailer

     
     
     
    AE
    Add to wish list
    Added to wish list
    Buy now
    Reset filter
    Show filter
    Hide filter
    Thank you very much for your rating
    Thank you very much for your rating
    Show other projects
    Hide other projects
    Hide article variants
    Show article variants
    Close application tip
    Open application tip
    Read experience report
    Close experience report
    Hide detailed material list
    Show detailed material list
    Comparison list
    Products
    Product
    Show more recommendations
    Hide further recommendations